Zigbee-based EPD devices

The overall flowchart for connecting Zigbee-based EPD devices to DeviceOn/ePaper is shown as below.

Configures Server IP on WISE-3240 platforms

Step 1. Open a browser and input http://{YOUR_WISE_3240_IP}, you should see the WISE-3240 login page.

Sign in to WISE-3240 management portal with the default account credentials.

Step 2. Go to the Device Onboarding page under the DeviceOn/ePaper item.

Step 3. Copy the on-boarding information from DeviceOn/ePaper server and then paste them to the following inputs.

Step 4. After a few minutes, you should see the online message for the EPD-Router device on DeviceOn/ePaper.

Assign EPD’s MAC addresses to the whitelist on each WISE-3240 router.

Step 1. Open a browser and sign in the DeviceOn/ePaper. Then, go to the Whitelist Setting page to configure the whitelist of WISE-3240 routers.

Step 2. Select one WISE-3240 router.

Step 3. Click the Add button to add one MAC address.

Step 4. Key in the MAC address of an e-paper device, and then click OK.

Step 5. Click this MAC address and then click the left arrow to move this MAC address to this WISE-3240 router.

Step 6. Click the save button to save this setting.

Step 7. After few minutes, you should see the online message for the EPD devices on DeviceOn/ePaper.